Waeco CF-1 Manual de instrucciones descargar pdf (Pagina 12)

CoolFreeze

Operation

Caution – Danger of damaging the device!

Make sure that the polarity is correct.

➤ Before starting up the device for the ﬁrst time, check whether the

operating voltage and the battery voltage correspond (see type

plate).

➤ Make sure that the cable at the positive battery terminal (Fig. 7 2,

page 6) is protected with a 15 A (12V) fuse (Fig. 7 3, page 6)

ﬁtted as close to battery as possible.

➤ Plug the 12/24-V connection cable (Fig. 1 2, page 4) into the DC

socket on the cooler (Fig. 7 1, page 6).

➤ Connect the red cable (Fig. 7 red, page 6) to the positive terminal

of the battery (Fig. 7 2, page 6).

➤ Connect the black cable (Fig. 7 black, page 6) to the negative

terminal of the battery (ﬁg. 7 2, page 6).

Connecting to a 100-240V AC mains (E.g. in the home or ofﬁce)

Caution – Danger of electrocution!

Never handle plugs and switches with wet hands or if you are standing

on a wet surface.

Caution – Danger of electrocution!

If you are operating your cooler on board a boat from a mains

connection of 100-240 V AC, you must install a residual current circuit

breaker between the 100-240 V AC mains and the cooler. Seek advice

from a trained technician.

The cooler has a built-in multi-voltage mains adapter with a priority

circuit for connecting to a 100-240V AC supply. The priority circuit

automatically switches to mains operation if the appliance is connected

to a 100–240 V AC supply, even if the 12/24 V cable is still connected.

When switching between the AC mains and the battery supply, the red

LED may light up brieﬂy.

➤ Plug the 100–240 V connection cable (Fig. 1 3, page 4) into the AC

voltage socket and connect it to the 100–240 V AC voltage mains.

CF80-110_M_70501 23/5/07 10:49 AM Page 13

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Waeco CF-1 Manual de instrucciones Pagina 12