Waeco CF-25 Manual de instrucciones descargar pdf (Pagina 42)

Operation

6.9 Replacing the device fuse

Only CF-35, CF-40, CF-50, CF-60

Caution – Danger of electrocution!

Disconnect the connection cable before you replace the device

fuse.

➤ Pull off the connection cable.

➤ Pry out the fuse insert (Fig. 6 2, page 4) with a screwdriver.

➤ Replace the defective fuse with a new one that has the same

rating (T2,5AL 250V).

➤ Press the fuse insert back into the housing.

6.10 Replacing the plug fuse (12/24 V)

➤ Pull the adapter sleeve (Fig. 9 4, page 5) off of the plug.

➤ Unscrew the screw (Fig. 9 5, page 5) out of the upper half of

the housing (Fig. 9 1, page 5).

➤ Carefully raise the upper half of the housing from the lower

(Fig. 9 6, page 5) half.

➤ Take out the contact pin (Fig. 9 3, page 5).

➤ Replace the defective fuse (Fig. 9 2, page 5) with a new one

that has the same rating (8A 32V).

➤ Re-assemble the plug in the reverse order.

_CF-18_60.book Seite 42 Donnerstag, 26. Juli 2007 3:18 15

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 207 208

Sin comentarios

Waeco CF-25 Manual de instrucciones Pagina 42